Voice And Dynacord Deliver Stadium-Wide Sound For 60,000 In China’s Greater Bay Area Sports and Cultural Center Stadium Install Knowledge Hub Latest News by Elton - November 17, 2026November 15, 2026 CHINA: Delivering consistent sound across 60,000 seats is a considerable undertaking, particularly in a stadium where long throw distances, varying stand heights and challenging acoustic conditions must all be addressed. At the Greater Bay Area Sports and Cultural Center Stadium in China, the brief extended beyond coverage and intelligibility: the system also had to accommodate a diverse programme of sporting events, large-scale performances and community activities, while withstanding the humidity, salinity and weather conditions associated with its coastal location. The resulting installation combines Electro-Voice loudspeakers with Dynacord amplification, processing and control. Guangdong Province Architecture Design Institute was responsible for the AV design, with Beijing Aotewei Technology serving as systems integrator and Guangzhou Gulaudio Technology undertaking the installation. At the heart of the stadium bowl are Electro-Voice X1i fixed-installation line arrays, selected to provide consistent sound pressure levels and speech intelligibility across the different seating areas. The considerable distances involved, coupled with the height differences between the upper, middle and lower stands, presented a particular challenge in balancing near-field and far-field coverage. Reverberation and multiple sound reflections added further complexity, with the system required to meet national Speech Transmission Index (STI) standards. In tow, environmental protection was another key consideration. Given the stadium’s coastal location, weatherised loudspeaker versions were specified to withstand high humidity and salinity, temperature fluctuations, wind and rain. “The stadium required long throw distances while significant height differences among upper, middle, and lower stands made it difficult to achieve consistent SPL and even coverage for both near-field and far-field listening areas,” explains Freddy Zhang from Electro-Voice. “Added to this, there were heavy reverberation and multi-path sound reflections that created major difficulties in meeting national STI standards for speech intelligibility. To meet these needs, the team opted for X1i arrays which deliver long throw performance and precise constant directivity control.” For the playing field, the design incorporates Electro-Voice MTS high-output point-source loudspeakers. With a stated maximum SPL of 154dB, the MTS cabinets provide the output required for field coverage during opening ceremonies and special events, with controlled directivity helping to focus sound within the intended area. System performance was modelled using Electro-Voice PREVIEW loudspeaker prediction software. Additional EVH horn-loaded point-source loudspeakers, alongside ZX5 and ZX1 compact point-source models, were deployed as fills and delays to address areas beyond the primary arrays. The installation also includes 66 ZX1i loudspeakers covering the viewing deck, while portable ZX5 cabinets serve the VIP rostrum. The amplification and processing infrastructure is built around Dynacord IPX Series amplifiers, with different models assigned to the stadium’s various loudspeaker zones. Nine IPX5:4 amplifiers power the five hangs of 14 X1i cabinets in the west stand, while four IPX5:4 units drive the five hangs of six X1i cabinets in the east stand. The north and south stands each use eight IPX5:4 amplifiers to power five hangs of 12 X1i cabinets. Four IPX10:4 amplifiers drive the six MTS cabinets covering the playing field. A further two IPX5:4 units power the 66 ZX1i loudspeakers on the viewing deck, with another pair assigned to the portable ZX5 system on the VIP rostrum. System management is handled by six Dynacord MXE5-64 Matrix Mix Engines and five TPC-1 touch-panel controllers, configured through SONICUE Sound System Software. Together with the IPX amplifiers, these components form a networked architecture that integrates audio transmission, DSP processing, zone control, system monitoring and scene management. The unified interface simplifies day-to-day operation, while centralised control and remote diagnostics support ongoing maintenance. The MXE platform’s open DSP architecture also allows scope for future expansion and functional upgrades. Reliability is addressed through a fully redundant IP network topology. Dynacord’s amplifiers and matrix mix engines work alongside the Dante network to support hot-standby switching, complemented by dual digital and analogue signal-chain backups and multiple power supply options. The architecture is designed to maintain system continuity in a venue where uninterrupted audio is essential across a wide range of events. Following commissioning, feedback from the stadium team has been positive. Zhang reports that the end user described “stable and flawless system operation, with outstanding overall sound performance, and professional and reliable service”. The installation brings together distributed loudspeaker coverage, networked processing and redundant infrastructure in a single system designed to serve the stadium’s varied operational demands. Share on Facebook Share Share on TwitterTweet Share on Pinterest Share Share on LinkedIn Share Share on Digg Share